• Image of Airrex air suspension kit.
  • Image of Airrex air suspension kit.

2013 Vehicle Application Listing

Every AirREX suspension kit comes with two (2) front air struts and two (2) rear air struts (or air spring + shock). Air struts are engineered to fit specific vehicles. AirREX Digital Wireless Air Management System (tanks, compressors, valves, air lines, etc.) and camber plates are sold separately.

Top plate options:
(R1) Standard top plates (comes with air struts).
(R3) Front camber plate.*
(R5) Front camber plate & rear pillowball mount.*
*Please note not all vehicles are available with camber plates. See listing below or download the application list.
Important Notices

All chassis codes and model years listed are the common chassis used for suspension development. Suspension testing and vehicle fitment are conducted at AirREX headquarters in Taiwan. Please contact us if you are in doubt of US chassis fitment or if an error is identified. Since most applications are only tested on Taiwan vehicles, fitment is not guaranteed on USDM vehicles as there may be some changes implemented by the vehicle manufacturer for sales in different regions.

Check your state and local laws regarding the use of any of these parts on public roads. AirREX parts are sold for off-road use only. Customer assumes all risk.

Vehicle Specific Upper Mount*

Every AirREX upper mount is CNC machined from 6061 aluminum and then hard anodized. High density polyurethane bushings and/or high performance bearings completes the package to ensure exact fitment and durability. These upper mounts not only simplify installation but also improve ride quality, handling, and help provide maximum drop by replacing the bulky OEM upper mount.

12 Clicks Adjustable Damper

A 12-way compression + rebound (together) adjustable damper is standard in every AirREX application. Each damper is matched to the air spring (bellow or sleeve) for the vehicle application and the user can further adjust for performance or comfort by the simple turn of a knob.

Double Convoluted Bellow

High durability 2-ply double convoluted air springs help provide both a comfortable ride at driving height and maximum drop when aired out. The size of the bellow is carefully chosen by AirREX engineers for each application to ensure correct spring rate and proper clearance for the vehicle.

Twist Lock Compression Fitting

Compression fittings are used to ensure a reliable leak free seal when used with 6mm or ¼ inch DOT nylon air tubing.

Fully Threaded Damper

Each AirREX damper is fully threaded to maximize adjustability similar to that of a coil over. Users can easily adjust for maximum drop or for maximum comfort at driving height by simply loosening the lower lock collar and turning the damper + air spring assembly up or down.

Vehicle Specific Lower Mount

Every AirREX application includes a vehicle specific lower bracket which is manufacture to exact OEM specification. Every tab or bracket for the hub, spindle, sway bar, brake lines, abs sensor, etc. is present to ensure proper fitment like that of the factory suspension. Some applications will include a high density polyurethane lower mount bushing.

* Not all applications include upper mounts. Please check applications list for full details.

When you are purchasing on the site please list what car you have. make and model.

Some make and models are a little bit higher depending on model.

Please confirm with one the following Vendors.




Full Digital Air System
Out of the Box kit comes with a 5 Gallon tank and x2 444 Viair Compressors.